How does the Flat Embroidery Machine Embroider Exquisite Patterns?

Update:05 May 2021

As a kind of computerized embroidery machine, a flat embroidery machine can replace manpower to complete complex embroidery work, saving more manpower. How to operate it to embroider exquisite patterns? Today we will briefly explain the following its workflow.

First, input the data into the machine, adjust the approximate starting position, and go empty first to determine whether the position setting is appropriate. If appropriate, go back to the original point directly, exit the idling, and click "Direct Embroidery" to start.

After the machine is running, it is necessary to re-wind the empty lock core below in time to prepare it for a while. After connecting two or three lock cylinders without thread, you can suspend the machine and replace all the lock cylinders after embroidering to the bottom position. Then re-wind the changed lock core and repeat the process.

The most important thing to pay attention to in this job is disconnection. The place where the machine is a bit smarter is that the light will be turned on in a short time, and the machine will automatically stop. Then after you re-thread the thread, push the lever and the machine will naturally continue to run.

Also, pay attention to whether the colored lines on the top are about to run out. If it is nearly used up, connect it from the source, then pull out the new thread and re-pierce it. If you don’t notice that the thread runs out, you need to perforate and hang the thread a little bit. If the winding is wrong, the machine will often stop automatically.

The splint is also very tiring. First, you need to lay a layer of the backing paper on the frame and fix it. Then spread the cloth and fix it. This is done at the same time as the input data. However, the data is only input once, and this must be fixed again after the embroidering of the pattern in the frame.

Apply thread oil once a day and engine oil twice a day to help the machine run better so that it is not easy to break the thread and can improve work efficiency.

Of course, there will be some differences in the operation of single head embroidery machines of different brands and functions. For more information about the operation process of the embroidery machine, you can consult Zhuji Zhiyu Machinery Co., Ltd. or read the manual.

0